Vicon provides regular firmware updates for their cameras and other hardware. Each firmware version download page contains information on the compatible hardware, the latest features and fixes. When updating Firmware make sure that the cameras and the remaining hardware run on the same Firmware.
Use this guide to upgrade your Vicon camera hardware.
Vantage Cameras and Mixed Camera Systems
Care must be taken when using mixed camera systems. Ensure that all cameras are using the same firmware version. This Firmware version should correspond to the newest generation of camera in your system. The latest version of this is Firmware 707 which can be found here [https://www.vicon.com/downloads/utilities-and-sdk/camera-firmware].
New updated firmware versions are designed to load onto legacy hardware(i.e. T-Series/Bonita), but do not (unless specially stated) contain any specific updates for these products and are functionally identical to previous legacy firmware builds. The ability to load newer firmware onto legacy hardware is provided for convenience when updating systems containing a supported mix of camera types.
Need a step by step guide to install the latest firmware? Check out our guide here
Legacy Camera System
If you own a system comprised of only legacy hardware (T-series, Bonita and MX Hardware) there is generally no need to update your firmware past the ‘Legacy Firmware Version’. The most recent version of this is Legacy Firmware 502 which can be found here [https://www.vicon.com/downloads/utilities-and-sdk/camera-firmware/archive/firmware-502]
Need a step by step guide to install the latest legacy firmware? Check out our guide here
Looking for a different firmware upgrade? All Vicon firmware can be downloaded through Vicon's Utilities and Firmware Downloads page [https://www.vicon.com/downloads/utilities-and-sdk]